Quick Tools QUTS8 Bedienungsanleitung Seite 25

•
Wear protective clothing (protective gloves, goggles, etc.) and prevent
the soldering iron from coming into contact with skin and hair or other
flammable materials.
•
Food is prohibited in this working environment.
•
Use for operation only in dry indoor areas, protect the device from liquids
and moisture, even from possibly damp hands. Otherwise, short circuits
and electric shocks could be triggered.
•
Inform other people in the work area that the temperature may be very
high during operation. Turn off the device as soon as the work is finished
to avoid hazards.
•
Do not leave the appliance unattended while it is switched on in
operation.
•
After turning off, wait until the heated parts have reached room
temperature if you want to touch them or change parts of them.
Measures for a safe working environment:
• Make sure that the device and the shelf are secure. Place the tool on the
shelf when not in use.
• The use of the device by children from 8 years and persons with
disabilities is possible if they are supervised and instructed for safe use.
• Power supply cables must not come into contact with sharp edges, heat or
oils. Damaged connection cables must be replaced by customer service to
prevent potential hazards such as electric shock, short circuits or fire.
• The device must only be operated at the rated voltage and frequency
specified on the device. Use only supplied earthing contact connecting
cables.
• Before use, check the device for damage and the correct fit of the
soldering tip. If damage is detected, it must be switched off. Then please
contact the customer service.
• Use only Quick Original replacement parts.
• When not in use, keep the device away from dust and moisture.
• Pay attention to the respective safety, health and safety regulations.
CAUTION
2
USER MANUAL