Quick Tools QUTS8 Bedienungsanleitung Seite 32

2.6.3. Standby
1. Open menu to change the standby time.
2. Select the Standby field with the +/- buttons:
The field
3. The ON/OFF button can be used to turn the standby function on and off.
4. The +/- buttons can be used to set the time after which the station should
go into standby. The time can be chosen between 5 seconds and 99
minutes.
5. SAVE to save the settings and BACK to exit the menu.
NOTE: The standby temperature is 200°C. If the currently set temperature is
200°C, the temperature does not change in standby.
NOTE: The QUICK extraction system QU6102A2 can be put into standby via a
connecting cable through the soldering station.
If an extraction system is connected, only this one soldering station can be
controlled via the PC. (see 2.6.11.)
2.6.4. Hibernation
Hibernation mode: The station switches off automatically. The station can be
switched on again by pressing the POWER button for a long time.
1. Open menu to program hibernation.
2. Select the Power Off box with the +/- buttons:
OK press →
changes to ON/OFF
9
USER MANUAL