Temperature Window - Quick Tools Quts8 Bedienungsanleitung

The field
1. The ON/OFF button can be used to turn the power off timer on or off.
2. The +/- buttons can be used to set the time after which the station should
go to sleep. This can be from 1 to 240 minutes.
3. SAVE to save the settings and BACK to exit the menu.
2.6.5. Display
The temperature can be shown in the display in two
different variants: Numeric and Graphical.
Numeric: Temperature is displayed as a numerical
value.
Graphic: Temperature (red) and heating power (blue)
are displayed as graphical functions.

2.6.6. Temperature window

If the temperature deviation from the target to the actual temperature is greater
than set here, a signal tone sounds.
1. Open Menu
press OK →
changes to ON/OFF
10
USER MANUAL