Igmp-Snooping Vlan-Id - Hirschmann Rm Cli Hios-2S Rsps Referenzhandbuch

IGMP Snooping
22.2.1

igmp-snooping vlan-id

Configure the VLAN parameters.

Mode: VLAN Database Mode

Privilege Level: Operator

Format: igmp-snooping vlan-id <P-1> mode fast-leave
groupmembership-interval <P-2> maxresponse <P-3> mcr-
trexpiretime <P-4> querier mode address <P-5> electi-
on-participate forward-known <P-6> forward-all <P-7>
static-query-port <P-8> automatic-mode <P-9>
mode: Enable or disable IGMP snooping per VLAN.
fast-leave: Enable or disable IGMP snooping fast-leave per VLAN.
groupmembership-interval: Set IGMP group membership interval time
(2-3600) in seconds per VLAN.
maxresponse: Set the igmp maximum response time (1-25) in seconds per
VLAN.
mcrtrexpiretime: Sets the multicast router present expiration time (0-
3600) in seconds per VLAN.
querier: Set IGMP snooping querier on the system.
mode: Enable or disable IGMP snooping querier per VLAN.
address: Set IGMP snooping querier address on the system using a VLAN.
election-participate: Enables the snooping querier to participate in
the querier election process when it discovers the presence of another
querier in the VLAN.
forward-known: Sets the mode how known multicast packets will be trea-
ted.The default value is registered-ports-only(2).
forward-all: Enable or disable IGMP snooping forward-all.
static-query-port: Enable or disable IGMP snooping static-query-port.
automatic-mode: Enable or disable IGMP snooping automatic-mode.
Parameter Value
1..4042
P-1
2..3600
P-2
1..25
P-3
0..3600
P-4
a.b.c.d
P-5
query-and-registe-
P-6
red-ports
registered-ports-only No addition of query ports to multicast fil-
slot no./port no.
P-7
slot no./port no.
P-8
slot no./port no.
P-9
166
Meaning
Enter the VLAN ID.
Enter a number in the given range.
Enter a number in the given range.
Enter a number in the given range.
IP address
Addition of query ports to multicast filter
portmasks.
ter portmasks.
22.2 igmp-snooping
RM CLI HiOS-2S RSPS
Release 3.0 01/2014