Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Children may not play with the device. Cleaning
and user maintenance must not be carried out by
children unsupervised.
• If the mains connection cable of this device is
damaged, it must be replaced by the manufacturer,
their service department or a similarly qualified
person to avoid dangers.
Safety instructions for the hot air weed burner
mATTENTION!
This device must be placed on its stand (9), when not
in use. (Fig. 6)
• A fire may occur if the device is not handled carefully.
• Be careful when using the device in the vicinity of
combustible materials.
• Do not point at the same place for a long time.
• Do not use in an explosive atmosphere.
• Heat can be conducted to combustible materials
that are concealed.
• Place on the stand (9) after use and allow to cool
before packing it away.
• Do not leave the device unattended while it is in
operation.
Safety instructions for the solid fuel lighter
• Check that the solid fuel lighter is in the correct
position.
• Disconnect from the mains before removing from
the fire.
• Allow the solid fuel igniter to cool before packing it
away.
• The connection cable or other combustible materials
must not come into contact with the hot parts of the
solid fuel igniter.
Additional safety instructions
m CAUTION!
Avoid the risk of injury, fire and health hazards: Pull the
mains plug out of the socket immediately in the event
of danger.
m CAUTION!
RISK OF INJURY!
• Never use the device as a dryer.
• Never point the hot air stream at people or animals.
• Do not look directly into the nozzle opening on the
blow-off pipe.
22 | GB
m CAUTION!
DANGER OF BURNING!
• Do not touch the hot nozzle.
• Wear protective gloves.
• Wear eye protection.
• Always disconnect the mains plug from the socket
during breaks in work, before carrying out any work
on the device (e.g. changing the adapter nozzle) and
when it is not in use.
• Maintain a distance to the workpiece or the surface
to be processed with the nozzle outlet. An air jam
can lead to overheating of the device.
• The device must always be clean, dry and free of
oil or grease.
• Never misuse the device.
6. Residual risks
The electric tool has been built according to state-
of-the-art and the recognised technical safety rules.
However, individual residual risks can arise during
operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
• Residual risks can be minimised if the "Safety
information" and the "Proper use" together with the
operating manual as a whole are observed.
• Avoid accidental start-ups of the device: The
operating button may not be pressed when inserting
the plug in a socket. Use the tool attachment that
is recommended in this operating manual. This is
how to ensure that your device provides optimum
performance.
• Keep your hands away from the working area when
the device is in operation.
7.
Technical data
Mains voltage
Power consumption
Temperature
Air quantity
Protection class
Weight
Technical changes reserved!
www.scheppach.com
230-240 V ~ 50 Hz
2000W
Level 1: 50°C
Level 2: 600°C
500 l/min
II
0.95 kg
Werbung
