Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified.
Please consider:
Read through the complete text in the operating manual
before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and
extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations
applicable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of identical devices must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
1.
Hot air fan
2.
3 stage on/off switch (0/I/II)
3.
Handle extension
4.
Handle
5.
Strain relief
6.
Cable clip
7.
Mains cable
8.
Lock ring
9.
Stand
10. Cone nozzle
11. Flat nozzle
12. Reduction nozzle
13. Spatula nozzle
14. Grill nozzle
3. Scope of delivery
• 1 hot air fan
• 1 handle
• 1 handle extension
• 1 stand
• 1 cone nozzle
• 1 spatula nozzle
• 1 flat nozzle
• 1 reduction nozzle
• 1 grill nozzle
• 1 Operating manual
4. Proper use
The device is suitable for the removal of uncontrolled
growth between paving slabs, on paved surfaces, on
masonry, in flower beds as well as in lawn surfaces
during the growth period, for the removal of paint,
for heating (e.g. for heat-shrink tubes) and for the
deformation and welding of plastics.
It can also be used to loosen adhesive joints, thaw
water pipes and ignite the barbecue.
Any other use or modification shall be deemed to be
improper use and could give rise to considerable risk
of accident.
www.scheppach.com
GB | 19
Werbung
