Parkside Performance PPTSA 20-Li C3 Originalbetriebsanleitung Seite 40

Recommended ambient temperature
Max. temperature
total
While charging
During operation
During storage
Noise emission value
The measured values have been
determined in accordance with EN 62841.
The A-rated noise level of the product is
typically as follo s
Sound pressure level L
Uncertainty K
pA
Sound power level L
Uncertainty K
WA
Total vibration value
Total vibration values tria ial vector sum
determined in accordance ith EN 2
Vibration – Main handle
Sawing in wood (a
Uncertainty K
Vibration – Auxiliary handle
Sawing in wood (a
Uncertainty K
WARNING!
m
Wear hearing protection!
38 GB/IE
0 C
C to 0 C
C to 0 C
0 C to C
79.1 dB
pA
3.0 dB
87.1 dB
WA
3.0 dB
2.484 m/s
h,W
1.5 m/s
2.980 m/s
h,W
1.5 m/s
NOTE
The declared vibration total value and
u
the declared noise emission value
have been measured in accordance
with a standard test method and may
be used for comparing one tool with
another.
The declared total vibration value and
u
the declared noise emission value
may also be used for a preliminary
assessment of exposure.
WARNING!
m
The vibration and noise emissions
u
during actual use of the product
can di er from the declared values
depending on the manner in which
the tool is used, especially what kind
of workpiece is processed.
Try to minimise exposure to vibration
and noise. Examples of measures
to reduce vibration include wearing
gloves when using the tool and
1
limiting working time. All parts of
the operating cycle must be taken
into account (e. g. times when the
product is s itched o and hen
2
it is running idle in addition to the
2
trigger time
Charging time
2
2
WARNING! Risk of injury and
m
property damage due to improper
handling of the battery pack!
Observe the safety instructions and
u
notes on charging and proper use as
shown in the user manual for your
battery pack and charger from the
20 V TEAM series.
You can nd a detailed description
u
of the charging process and further
information in the separate user
manual.