Behaviour In Emergency Situations; Residual Risks; Unpacking The Product; Preparation - Parkside Performance Pptsa 20-Li C3 Originalbetriebsanleitung

Maintain this product in accordance
with these instructions and keep it well
lubricated here appropriate
Plan your work schedule to spread any
high vibration tool use across a longer
period of time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will help
to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise and
handle risks early. Fast intervention
can prevent serious injury and damage
to property.
S itch the product o if there are
malfunctions. Have the product
checked by a uali ed professional
and repaired, if necessary, before you
operate it again.
˜ Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury and
damage remain. The following dangers
can arise in connection with the structure
and design of this product
Cutting injuries
Hearing damage if suitable ear
protection is not worn
Health injuries resulting from the e ect
of vibration on the hands and arms in
the event that the product is used over
a longer period of time or is not used
and maintained properly
NOTE
This product produces an
u
electromagnetic eld during
operation This eld may under
some circumstances interfere with
active or passive medical implants!
To reduce the risk of serious or fatal
injury, we recommend persons with
medical implants to consult their
doctor and the medical implant
manufacturer before operating this
product!
˜ B
˜ Unpacking the product
1. Take the product out of the packaging
and remove all packaging materials
and plastic wrappings.
2. Check to make sure that all listed parts
are included see "Scope of delivery"
3. Check whether the product and all
parts are in good condition, if any
damage or defect is detected, do
not use the product, but follow the
procedure described in chapter
"Warranty".
˜ Preparation
˜ Checking the charging level
of the battery pack
Press next to the charging level
[ ]
o
indicator on the battery pack
[ ]
The charging level of the battery
o
pack is indicated by illumination of
[ ]
the corresponding LED lights on the
charging level indicator
Indicator Colour
Red,
orange,
green
Red, orange Partially
.
[ ]
.
[ ]
M i
Fully
charged
charged
GB/IE 45