Fuxtec FX-RME43 Bedienungsanleitung Seite 37

down beforehand. To reduce storage space, the top handle can be folded down. Release the quick-
release levers and fold the handle down (Fig. 17).
Caution: Do not pinch or pinch the electric cord when folding down the handle.
Fig. 17
Maintenance
ATTENTION: Always unplug before maintenance or cleaning work!
Do not spray the device with water. Contact with water can damage the switch/plug combination
-
and the electric motor.
Clean the device with a cloth, hand brush, etc.
-
WARNING
Always wear protective gloves during maintenance work. Do not perform maintenance when the engine
is running or hot.
WARNING
Only use spare parts, accessories and attachments from the original manufacturer. Failure to do so can
lead to injuries and loss of performance.
Maintenance is required:
a) If the lawn mower hits an object. b) If the engine stops suddenly.c) If the blade is bent (do not align!).
d) If the motor shaft is bent (do not align!). e) If a short circuit occurs when connecting the lawn mower.
f) If the gears are damaged.
Always have the mower blade resharpened or replaced by an authorised repair shop. Unbalanced blades
lead to excessive vibrations of the lawn mower.
Cleaning
The lawn mower should be thoroughly cleaned after each use. Always clean your lawn mower
immediately after use. Do not allow cut grass and other residues to dry and harden on the surfaces of
the lawn mower. Dried grass residues and dirt can affect mowing performance. Check that the grass
discharge channel is free of grass residue and remove it if necessary. Check the bottom of the lawn
mower and the blade holder.
Troubleshooting
CAUTION: Before servicing or cleaning, turn off the engine and wait for the blade to come to a stop.
37