Stopping The Lawn Mower; How To Use The Cable Holder; Grass Collector - Fuxtec Fx-Rme43 Bedienungsanleitung

Fig. 11
(2)
(1)

30. Stopping the lawn mower

Release the handle switch to stop the machine.
WARNING
Wait for the blade to stop completely before starting the machine again. Do not quickly turn the device
off and on again.
WARNING
Always disconnect the power supply from the power supply after you have completed the work.

31. How to Use the Cable Holder

In case the extension cord is disconnected from the power supply during operation, the device has a
cable holder. The cable holder hangs from the cable guide rod.
To use the cable holder:
4. Form a tight loop near the cable holder.
5. Slide the loop through the bottom hole in the cable holder (see Fig. 12).
6. Move the loop over the mounting clip (see Fig. 13) and pull down until the cable is attached to the
cable holder.
Fig. 12

32. Grass collector

The grass collector has two functions in this device:
3. If the grass collector is empty or not completely filled with grass, the level indicator window remains
open (see Fig. 14.a).
4. When the grass collector is completely filled with grass, the level indicator window closes (see Fig.
14.b).
WARNING The motor has been turned off, the blade will continue to run for a few seconds.
Therefore, do not touch the bottom of the lawn mower until the blade has come to a complete stop!
(2)
Fig. 13
34