Fuxtec FX-RME43 Bedienungsanleitung Seite 31

Important information for mounting the mower
Before assembling and operating the electric lawn mower, please read the entire user manual and the
instructions contained therein carefully first.
Remove the lawn mower from the cardboard packaging and check that there are no loose parts left in
the packaging.
Attention
Never use mower unless the collection bag provided is in position.
WARNING
Always make sure the lawn mower is turned off and the power plug is unplugged from the power source
before making any adjustments or performing any maintenance.
Attach the handle
Attach the lower handle assembly to the lawn mower (Fig. 4a (1)).
Screw the quick release set to the bolt and lock it firmly (Fig. 4a (2)). The height of the handle can be
adjusted in three positions (L, M and H) by turning the height adjustment attachment.
Make sure the arrow is aligned in the same position on both sides of the height adjustment attachment
to select the desired handle height.
Attach the top handle to the bottom handle, align the holes in the top handle and bottom handle. Insert
the screws through the holes and install the flat spacers. Screw the quick-release assembly to the screw
and lock it tightly (Fig. 4b).
(1
)
(2
)
H
M
L
Attachment of the grass catcher
First, attach the handle of the collection bag, as shown in Fig. 5a. Insert the front end and then attach
the rear end. Make sure the handle is tight before use.
Attach the edge of the basket to the frame (Fig. 5a (3)).
-
(1
)
(2
)
31