Grasscatcher; Mulching; Starting The Lawn Mower - Fuxtec Fx-Rme43 Bedienungsanleitung

27. Grasscatcher

If you want to use the grass catcher feature, follow these steps:
1. Open the back door and hold it firmly.
2. Attach the rear door support to the chassis as shown in Figure 8.
3. Close the back door.

28. Mulching

You can collect and compost the grass with the grass collector or use the mulching insert for the
mulching process. To do this, remove the grass collector and insert the mulching insert as shown. The
cut grass is thus not thrown into the collection basket by centrifugal force but remains in the area of the
knife and is thus chopped into small pieces. The chopped grass falls to the ground between the blades of
grass and turns into humus through decomposition – the lawn immediately receives a natural, organic
fertiliser.
1. Open the back door and hold it firmly.
2. Hold the mulching insert by the handle and insert it into the discharge chute (Fig. 9.).
3. Close the back door.
Fig. 9

29. Starting the lawn mower

1. Connect the machine to an approved outdoor extension cord.
2. Hold down the start button (Fig. 11 (1)).
3. Drag the handle (Fig. 11 (2)) and shift up to the handle to start the mower.
4. Release the start button to start the machine.
Warehouse position Working position.
33
Fig. 8.