Setting Up; Setting Up The Digital Send Authentication Solution - HP Officejet 9100 Leitfaden Zur Inbetriebnahme

1

Setting up

The digital send authentication solution allows you to enable greater security settings for the
HP Officejet 9100 series all-in-one when connected to Microsoft
• User authentication through Windows NT
perform digital send activities or all activities from the control panel.
• Through Windows NT domain login, the all-in-one determines the e-mail address of the
current user and adds this address automatically to any e-mail messages sent.
• Administrator menus and settings can be locked to prevent unauthorized modification.
NOTE: The digital send authentication solution enables the same level of security as existing
Windows security protocols. It might not support all non-default Active Directory security settings.
To use the digital send authentication solution, the all-in-one must have a keyboard and a
supported HP Jetdirect print server installed. For more information, see "Specifications" on
page 12.
LDAP settings and the digital send authentication solution
With the digital send authentication solution, you can use either the LDAP server included in
Active Directory or a separate, "external" LDAP server for LDAP searches.
To use the LDAP server in Active Directory, be sure to leave the LDAP server address in the
all-in-one configuration blank when you set up the digital send authentication solution. The LDAP
server automatically detects the address from the network and uses the login user's credentials
with Kerberos authentication.
To use an "external" LDAP server for e-mail searches, be sure that all LDAP server settings for the
all-in-one are configured. The LDAP server uses the username and password specified in these
settings with simple (plain text) authentication.
NOTE: The LDAP server in Active Directory is used when logging in to the all-in-one—even if an
external LDAP server is set up. However, the external LDAP server is still used for LDAP searches
for e-mail.

Setting up the digital send authentication solution

To install the digital send authentication solution, complete the following tasks:
1. Back up your all-in-one settings
2. Upgrade the firmware
3. Install the digital send authentication DIMM
4. Configure the security settings
4 Setting up
®
Windows
®
domain login can be required before users
®
networks: