Werbung
Verfügbare Sprachen
Verfügbare Sprachen
▶ Press the . or / key to select the setting time, main
operating mode, temperature or fan speed for the event.
▶ Confirm with key.
▶ Make the setting and press the key to confirm or the
DAY OFF key to delete the setting.
▶ Repeat the procedure to define additional setting periods
for this day.
▶ Follow the same procedure to program additional
weekdays.
To delete the timer for the selected day:
▶ Press the DAY OFF key.
Defining the setting time
▶ Press the . or / key to adjust the time.
▶ Confirm with key.
Selecting the main operating mode
▶ Press the . or / key to select the main operating mode
( Table 30, [1], page 59) ).
▶ Confirm with key.
The fan speed cannot be adjusted in automatic and
dehumidification mode.
Setting the room temperature
▶ Press th . or / key to set the desired room temperature.
▶ Confirm with key.
Fan step
▶ Press the . or / key to adjust the fan step.
▶ Confirm with key.
The temperature cannot be adjusted in Fan Mode.
Activating the timer
▶ Press the TIMER key until WEEK 2 appears in the display.
The timer is now switched on. The unit will adjust itself
automatically on these selected times and days.
Deactivating the timer
▶ Press the Kor TIMER key for several seconds.
5.5.4 Additional settings for weekly timer
Provisionally disabling the timer
To disable the timer on selected days only:
▶ Press the TIMER key until WEEK 1 or WEEK 2 appears in
the display.
Climate Room Control – 6721841498 (2023/04)
▶ Press the key.
▶ Press the . or / key to select the weekday.
▶ Press the DAY OFF key.
The selected day is no longer displayed.
The timer is deactivated for the days that are not displayed until
the day has passed.
▶ Press the DAY OFF key again to display the day once again.
▶ Repeat the above if necessary for the other days.
Adopting (copying) settings from one day to another day
▶ Press the TIMER key until WEEK 1 or WEEK 2 appears in
the display.
▶ Press the key.
▶ Press the . or / key to select the day whose settings
should be adopted.
▶ Press the COPY key to copy the settings.
CY appears on the display.
▶ Press the . or / key to select the day to which the settings
should be copied.
▶ Press the COPY key to insert the copied settings.
The selected weekday flashes briefly as confirmation.
▶ Repeat the above steps if necessary to copy the
information to other days.
▶ Press the key to adopt the changes.
5.6
Setting the swing function
NOTICE
If the louvre remains at the lowest position during cooling mode
for an extended period, condensate may be discharged.
Adjusting the louvre by hand may cause faults.
▶ Only use the wired room control or remote control to adjust
the louvre.
The function and availability of the swing function depends on
the indoor unit.
5.6.1 Indoor unit with vertical and horizontal swing
function
Automatic vertical swing mode (up/down):
▶ Press the
key.
The symbol
appears.
▶ To cancel the automatic vertical Swing mode: press the
key again.
Operation
61
Werbung
