WELDY miniwelder geo2 Bedienungsanleitung Seite 14

2.4 Application miniwelder roof3
3. Technical data
Type
Voltage
Power consumption
Frequency
Wedge temperature max.
Welding with (geo2 incl. test channel)
Emission level
Material of wedge
Weight
Speed
Material thickness
(depending on type of material)
Max. overlap
Mark of conformity
Protection class I
Technical data and specifications are subjected to change without prior notice.
14
Note: For PVC welding materials, the miniwelder must be used
with a steel wedge.
Intended use:
The roof3 miniwelder is designed for overlap welding thin
roofing membranes on flat and pitched roofs: PVC, TPO/FPO,
LDPE, HDPE, PP, EVA, thermoplastic EPDM.
Any use other than or beyond that described above is deemed
non-intended.
Areas of use:
Flat roofs, pitched roofs, manufacture of covers used on fish
farms, agriculture and biogas retention bags, etc.
geo2
V~ 120/230
W 800
Hz
°C
mm 12 / 12 / 12
LpA (dB)
Copper /
Aluminum
Steel
kg 3.9
m/min
mm
0.5 – 1.5 0.05 – 1.0
100
mm
tex1 tex2 roof2
230 120/230 120/230
300 800
50/60
480
15 20
60
Copper / Aluminum /
Steel
3.5 3.5
0.4 – 7.5
0.2 – 1.0 0.3 – 1.0
100 100
roof3
230
800 800
40 12 / 12 / 12
Copper /
Steel Steel
4.0 3.9
0.4 – 3.0
0.5 – 1.5
80 80