Werbung
Verfügbare Sprachen
Verfügbare Sprachen
44
Oval end cap 1
45
Levelling foot
46
Foam holder 1
47
Foam handle 2
48
Crank cover
49
Crank cover
50
Plastic spacer φ32*φ16*22
51
Plastic spacer φ28*φ10*18
52
Plastic spacer φ32*φ10*15.5
53
Plastic spacer φ32*φ16.2*14
54
Guide rail sheet
55
Pulse sensor
56L/R
Pedal
57
Sensor cable
58
Connection cable
59
Pulse measurement cable
60
Power supply
61
Ball cap
62
Oval end cap 2
63
Round cover 1
64
Round cover 2
ASSEMBLY MANUAL (→ See page 3)
CAUTION! Follow the steps below during the assembly and use tools
supplied with the product. Prepare sufficient space for the assembly
operation. It is advisable to assemble the product with another person
because of the weight of some elements.
ADJUSTMENTS
Levelling
Level the device by rotating the levelling feet in the rear and front
base.
COMPUTER MANUAL
COMPUTER (MODEL) OT-1PRO
Remove the safety film from the display before use.
AUTO ON/OFF
The computer will switch on once the flywheel is set in motion or
when the dial is depressed. The computer will automatically shut
down after 3 minutes of inactivity.
DESCRIPTION OF OPERATION
PRESSING THE DIAL
•
While in activity mode, the display mode can be switched on by
pressing the dial.
•
While in activity mode, the data can be reset by long-pressing
the dial.
•
Pressing the dial is signalled by a sound.
6
6
TURNING THE DIAL
2
•
Parameters and functions can be adjusted in standby mode by
2
turning the dial. The value increases when turning clockwise
2
and decreases in the opposite direction.
2
•
While in activity mode, the resistance level increases as you
14
turn the dial clockwise. Turning it in the opposite direction
4
reduces the level of resistance.
4
2
STARTUP IN COUNTDOWN MODE OR IN MANUAL MODE
2
The computer will activate when motion is detected or when you
2
press the dial and the lights lining the perimeter will be displayed. It
1+1
will then automatically enter P countdown mode.
1
1
2
1
6
2
2
2
In P mode, it is possible to set the countdown of time, distance and
calories.
•
Press the dial to select the appropriate parameter.
•
Turn the dial to set the countdown value for the selected
parameter.
•
The countdown will start automatically when the user's
movement is detected.
COUNTDOWN PARAMETERS
TIME: change in value every 1 min, minimum value 1 min
DISTANCE: change in value every 0.5 km, minimum value 0.5 km
CALORIES: change in value every 1 kcal, minimum value 1 kcal
If the set value is zero, the workout will start in manual mode.
EN
18
Werbung
