Updating­the­firmware­version; Privacy Policy; Disconnecting The Device And Deleting Data From The App; Problems With The App? - Faq - Parkside Performance Pphksa 40-Li A1 Originalbetriebsanleitung

GB MT
-­ You­can­restore­the­operating­settings­
via­the­"Reset"­selection­under­Reset to
Factory Settings. All stored data will be
deleted.
Swipe from left to right to reach the Smart
Battery­overview­page:
- Brief overview
- Display in real time as graphs:
-­ Temperature
-­ Charging­current
-­ Discharge­current
-­ Capacity
-­ Lock battery
-­ Battery work mode
-­ Discharge­voltage
-­ Max.­cont.­discharge­current
-­ Device info indicates the paired smart
device
-­ PUSH notifications
-­ Overheated­
- Battery identifier
-­ Degrees Fahrenheit/Degrees Celsius
switchover
-­ Information
-­ Statistics
Updating­the­firmware­
version
A­red­dot­next­to­the­Firmware Version in-
dicates­if­an­update­is­available.­
1.­Select­the­firmware­version.
2.­Select­"Update".
3.­Select­"Start­update".
The bar indicates that the update
is in progress.
4.­Wait­until­the­Smart­LED­
stops­flashing,­this­may­take­several­
minutes.
After­the­Smart­LED­
the update has been successfully trans-
44
5. Restart the Lidl Home App.
When the update is complete on the smart
battery, the smart battery cuts the connec-
tion­to­the­smartphone­to­avoid­interfer-
ence.
The smart battery then transfers the update
to­the­Performance­device.­The­Smart­LED­
installing­the­update,­the­Smart­LED­
(26).
You­can­now­pair­the­smart­battery­with­
the app again.

Privacy policy

The­complete­privacy­policy­can­be­found­
under the tab
Policy".
Disconnecting the device and
deleting data from the app
1. In the
2. Select the
3.­Select­"Remove device".
4.­To­delete­the­data,­select­"Disconnect
Problems with the
app? – FAQ
(26)­
1. Select the battery you are using the Per-
(26)­goes­out,­
ferred­to­the­Performance­device.
The update is transferred from the
smartphone to the smart battery.
(26)­flashes­during­this­process.­After­
­in­the­field­"Privacy
­tab,­select­the­device­that­you­
want­to­remove­and­whose­data­you­
want to delete.
icon in the top right.
and delete data".­
If­you­just­want­to­disconnect­the­device­
without­deleting­the­data,­select­"Dis-
connect".
formance­device­with­from­the­device­
list.