Selecting No-Load Rotation Speed; Switching On/Off; Connecting The Device With The Lidl Home App - Parkside Performance Pphksa 40-Li A1 Originalbetriebsanleitung

GB MT
wards­and­fix­the­guide­rail­to­the­
workpiece.
•­ Place­the­device­with­the­groove­on­the­
guide­rail­(37).
• Set the desired cutting angle as de-
scribed­in­the­chapter­"Setting­the­cut-
ting­angle".
• Hold the machine with both hands, one
hand­on­the­handle­(3)­and­the­second­
on­the­auxiliary­handle­(13).
• The saw blade must not touch
the workpiece when switched
on!
­ Switch­on­the­device,­see­chapter­
"Switching­on/off"
•­ Saw­forward­with­moderate­pressure­–­
never­backward.
Selecting no-load
rotation speed
The­preselection­button­(29)­can­be­
used­to­select­one­of­the­6­no-load­
rotation­speed­levels­or­the­ECO­mode­be-
fore­you­start­the­device.

Switching on/off

Switching on:
1.­ Press­the­switch­lock­(1)­on­the­right­or­
left­of­the­handle­(3).
2.­ Operate­the­on/off­switch­(2).
Once­the­machine­has­started­
up, you can release the switch
lock­(1).
Switching off:
1.­ Release­the­on/off­switch­(2).
42
Connecting the device
with the Lidl Home App
The device can only be connected to
the Lidl Home App if you are using it
with a smart Performance battery.
1. To insert the Smart Performance bat-
33)­into­the­device,­slide­the­
teries­(
Smart Performance batteries along the
guide­rails­( 24)­into­the­device.­You­
will hear them click into place.
You­must­activate­the­device,­to­
do so press the preselection but-
ton­( 29).­The­device­is­now­activat-
ed­and­the­Smart­LED­indicator­
26)­flashes­(briefly).
2.­Enable­Bluetooth
3.­Open­the­Lidl­Home­App.
From here there are options
 ­to­connect­the­device.

If­this­is­the­first­device­you­want­to­con-
nect­to­the­app:
4.­On­the­tab­ ­"At home",­select­the­op-
tion­"Add device".­
The­app­scans­the­area­for­available­
devices­and­indicates­if­available­devic-
es­have­been­found.­
If this is not the case, read on if

possible
5.­If­you­select­„Go to add",­the­available­
devices­are­displayed­in­a­list.
6. Select the Smart Performance battery
with­which­you­are­operating­the­device­
by setting the check mark
only­one­device­at­a­time.­If­there­are­
other­check­marks­for­other­devices,­
clear the check marks by pressing them.
7. Now press the
our as the set check mark.
® on your smartphone.
  
, ,
.
. Select
that has the same col-
­(
and