Changes To The Unit; Safety For The Personnel; Safety During Use; Disposal - Heidolph Unimax 2010 Bedienungsanleitung

Safety Instructions

Changes to the unit

▪
No unauthorized changes may be made to the unit.
▪
No parts may be used which have not been approved by the manufacturer.
▪ Unauthorized changes result in the EC Declaration of Conformity loosing its validity,
and the unit may no longer be operated.
▪
The manufacturer is not liable for any damage, danger or injuries that result from
unauthorized changes or from operating the unit other than as described in this
manual.

Safety for the personnel

➜ Ensure that only qualified personnel operates the device.
➜ Observe the following regulations:
- Laboratory guidelines
- Accident prevention regulation
- Ordinance on Hazardous Substances
- Other generally accepted rules of safety engineering and occupational health
- Local regulations

Safety during use


➜ Wear the appropriate protective clothing when working on the device (clothing,
protective glasses and if necessary, safety gloves).
➜ Do not use the device in potentially explosive areas. The device is not protected
against explosion. There is no explosion or ATEX protection available.
➜ Do not operate or assemble devices in the vicinity which are emission or radiation
sources (electromagnetic waves) for the frequency range (3×1011 Hz to 3×1015 Hz).
➜ Avoid putting pressure on the display when you are not operating the device.
➜ Eliminate errors immediately.
➜ Do not use abrasive material to clean the glass surface. Only wipe with damp cloth.
➜ Always switch the device off after use.

Disposal


➜ Check the device components for hazardous substances and solvents.
➜ Clean all components before disposal.
➜ Dispose of the device according to the appropriate national legal regulations.
➜ Dispose of the packaging material in accordance to the appropriate national legal
regulations.
8