Safety Instructions
Installation / Electrical safety
▪
The device may only be connected when the mains voltage corresponds to the infor-
mation on the type plate of the unit.
▪
The mains connection must be accessible at all times.
▪
Repairs may only be performed by a qualified electrician.
▪
Never operate the unit with a damaged power cord.
▪
Always turn the unit OFF and disconnect mains power before performing any
maintenance or service.
Personnel qualification
▪
The device may only be operated by qualified persons.
▪
The device may only be operated by individuals who have been instructed in its
proper use by qualified persons.
▪
The device may only be operated and maintained by persons who are of legal age.
▪
Other personnel may only work with the unit under continuous supervision of an
experienced qualified operator.
▪
This manual must be read and understood by all persons working with the device.
▪
The personnel must receive special safety instructions in order to guarantee respon-
sible and safe work procedures.
Operating company's obligations
Installation site
▪
The device must be positioned in a suitable location.
▪
The device must be installed sufficiently stable.
▪
All screw connections must be securely tightened.
▪
Do not operate the device in proximity of highly inflammable and explosive substances.
▪
Installation and operation of the device is only permitted in facilities which are fitted
with the appropriate laboratory equipment (e.g. with air extraction units).
▪
We recommend operation in fume hood enclosures.
▪
The device may only be operated in enclosed spaces and under the following environ-
mental conditions:
Ambient temperature
Installation altitude
Degree of pollution
Overvoltage category
5 - 31 °C at 80 % relative humidity
32 - 40 °C decrease linearly
till max. 50 % relative humidity
0 - 2,000 m (6,500 feet) height above sea level
2
II
7