Heidolph Unimax 2010 Bedienungsanleitung Seite 20

Assembly
Components multi-tier attachment:
▪ 4 columns
▪
1 box-end spanner
▪
8 clamping sleeves
To adjust height of clamping sleeves
correctly the columns feature four marks
A, B, C and D.
▪ 25 ml Erlenmeyer flask, 3 platforms,
marks A and D
▪ 50 ml Erlenmeyer flask, 2 platforms,
marks C
▪ 100 ml Erlenmeyer flask, 2 platforms,
marks B
▪ 250 ml Erlenmeyer flask, 2 platforms,
marks A
➜ Install 4 ea. columns and pull tight
with box-end spanner from your
hardware bag.
➜ Locate first platform over columns.
➜ Slip 4 ea. clamping sleeves with wing
bolt situated below over columns.
➜ Align top rim of clamping sleeves with
adequate marks and secure with wing
bolts.
✓ Wing bolts must be adjusted vertically
to the outer edge of the platform.
➜ Ensure all bolts and screws have been
pulled tight.
➜ Install second platform over columns
and seat on clamping sleeves.
➜ Install 3rd platform (if required) by
repeating above steps.
A
B
Marks
C
D
Column
Clamping sleeve
Wing bolt
Perforated platform 2
Clamping sleeves
20