Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
9 Installation
9.1 Installation location
An installation location which is not exposed to humidity, water, vapours, alkalis, acids, extreme
•
hot or cold temperatures or mechanical stresses should be chosen.
The mounting surface must be flat and free of distortions.
•
The mounting surface must be free of vibrations and shocks.
•
9.2
Mounting
Mounting the device
2024/11
Operating instructions Compact R | Compact K | Compact L plus
Drill two holes with a vertical spacing of
120 mm
Insert both wall plugs
Screw the screw (1) into the upper hole
until the screw head is 2 cm away from
the wall.
Hang the device on the screw.
Secure the device with screw (2) and
tighten screw (1).
The device is mounted
EN
31 / 56
Werbung
