Werbung
Always ensure grounding when using, main-
Î
taining and cleaning in an explosive atmos-
phere.
Observe ATEX/IECEx labelling:
Î
II 2G Ex h IIB T4 Gb
Risk of injury from toxic
materials and substances
Inhaling the processed material (e .g. paint, solvent
vapour) can lead to breathing difficulties, restricted
fertility, genetic changes or cancer.
Wear suitable respiratory protection.
Î
Ensure adequate ventilation.
Î
Set appropriate atomisation pressure.
Î
Ensure there is sufficient distance between the
Î
spray gun and the workpiece (distance depends
on the coating material).
Risk of injury due to unexpected
escape of compressed air and/
or escape of the spray medium
Empty spray gun and gravity flow cup
Î
completely
Dispose of spray medium properly.
Î
Risk of injury from hot surfaces
Processing hot materials (>43 °C / 109.4 °F) can
cause burns.
Do not process material with material tempera-
Î
ture >43 °C.
Wear suitable protective clothing.
Î
Risk of injury from noise
When using the spray gun, noise levels of 85 dB(A)
may be exceeded.
Wear suitable hearing protection.
Î
Risk of injury from sharp edges
The material connection thread of the spray
gun has sharp edges and can lead to cuts when
working on it (e. g. assembly, disassembly, mainte-
nance, cleaning).
Wear suitable protective gloves.
Î
EN
Safety
95
Werbung
