•
Conversions and modifications to the spray gun
are not permitted.
•
Do not direct a spray gun at human beings or
animals.
•
Do not bring the spray gun into potentially explo-
sive atmospheres of ex-zone 0.
•
Do not use solvents and cleaning agents based
on halogenated hydrocarbons.
•
Do not use spray media containing acids, alkalis
or petrol.
•
Do not use the spray gun in the vicinity of igni-
tion sources (e.g. naked flames, lit cigarettes).
•
Do not use the spray gun in the area of non-ex-
plosion-proof electrical equipment.
•
Do not use the spray gun if you are under the
influence of e.g. drugs, alcohol or medication.
General Safety Instructions
Wear suitable personal protective equipment
Î
when using, cleaning and maintaining the spray
gun:
•
Breathing and eye protection
•
Protective gloves
•
Protective clothing
•
Safety shoes
•
Hearing protection
Comply with the local regulations for safety,
Î
accident prevention, occupational health and
safety and environmental protection.
Safety instructions for installation and
operation
When working with the spray gun, always limit
Î
solvents, paints or other coating media to the
quantities which are required for the paint job.
After the end of the work, take them to the
designated storage rooms.
Check the spray gun for damage and complete-
Î
ness before each use. Do not use the spray
gun if it is damaged or missing parts.
When the spray gun damaged, stop using the
Î
cleaning equipment immediately and discon-
nect it from the compressed air circuit.
Only use solvent-resistant, antistatic, undam-
Î
aged, technically flawless compressed air
hoses with a permanent pressure resistance of
minimum 10 bar!
EN
Safety
93