Installation And Connection - Oase Lunaqua Connect System Gebrauchsanleitung

Installation and connection

Lights
• A light may be permanently immersed to a depth of 1 m (IP68/1 m).
• Installation variants:
– With ground stake (only for soft ground conditions)
Ensure that no pond liners or underground pipes are damaged.
– With foot
The holes on the foot allow you to screw it to a paving slab or a wall.

Two extension pieces are included in the scope of delivery for raising the position of the
lights, which can be screwed between the light and the ground stake/foot.
Controller
• Install the Controller OASE Switch so that it is protected from flooding.
• Position the Controller OASE Switch as close as possible to where you want to control the sys-
tem using your smartphone or tablet.
• You can optimise the radio range by installing the Controller OASE Switch around 20 ... 30 cm
above the floor.
24
LAA0069