Intended Use; Product Description; Installation And Connection - Oase LUNAQUA 3 Gebrauchsanleitung

- EN -

Intended use

LunAqua 3, referred to as "unit", may only be used as specified in the following:
• For use in water fountain systems and ponds.
• For use above and under water.
• Operate in accordance with instructions.

Product Description

LunAqua 3 is a spotlight kit with coloured disk inserts for amazing effects in garden and pond lighting. The kit contains
one, two or three spotlights (depending on the set) which can be set up above or below the surface of the water.
Scope of delivery
The delivery scope includes:
• One, two or three spotlights (depending on the kit).
• One wall/floor fixture per spotlight.
• One nozzle holder per spotlight.
• One ground stake per spotlight.
• One mounting plate per spotlight.
• One coloured disk insert per spotlight.
• One transformer.
• One operating manual.
Operation requires the following products, which are not included in the scope of delivery:
• Halogen bulb G4, max. 20 W.

Installation and connection

W A R N I N G
The unit gets very hot during operation. Combustible materials in the surrounding area could catch fire.
• Do not operate the unit in the vicinity of combustible materials.
• Never cover the unit.
Inserting a bulb
The lamp is supplied without bulbs. A halogen bulb G4 (max. 20 Watt) must be inserted prior to the first set-up.
How to proceed:
 A
Unscrew the union nut.
Remove the glass or coloured disc and O-ring.
Insert a bulb.
– The bulb is inserted by plugging.
– Do not touch with your fingers, use a cloth or similar
Reassemble the unit in the reverse order.
– Ensure that no moisture can enter the unit.
12