Oase LunAqua Connect System Gebrauchsanleitung Seite 21

Lights
Cables
Control system
Power supply
.
LunAqua Connect S, M, L
• With white light in various light intensities.
• Dimmable in conjunction with the optional Controller OASE Switch.
• Installation optionally with foot or ground stroke.
• Includes 2 extension pieces for raising the position of the light.
LunAqua Connect M RGB
• With coloured light.
• Can only be used in conjunction with Controller OASE Switch.
• Dimmable, selectable light colour.
• Installation optionally with foot or ground stroke.
• Includes 2 extension pieces for raising the position of the light.
Information in accordance with the German Ecodesign Directive / the Energy-
Related Products Act (EVPK):
The bulbs cannot be replaced due to the design.
These products contain light sources of energy efficiency class "G".
Cables and distributors for creating light strands (optional accessory).
• For WHITE (2-pin):
− LunAqua Connect WHITE Extension Cable 5 m (Article number 87037)
− LunAqua Connect WHITE Outlet Ext. Cable 10 m (Article number 87511)
− LunAqua Connect WHITE 3way Distributor (Article number 87039)
• For RGB (4-pin):
− LunAqua Connect RGB Extension Cable 5 m (Article number 74351)
− LunAqua Connect RGB Outlet Cable 10 m (Article number 74356)
− LunAqua Connect RGB 3way Distributor (Article number 87038)
LunAqua Connect Controller OASE Switch
• For operating the system components via a wireless connection.
Messages from the green status LED:
Off: The Controller is switched off (no supply voltage).
Lights up: The Controller is switched on.
Messages from the blue status LED:
Off: The Controller is not connected to any unit.
Lights up: The Controller is connected to a smartphone/tablet and can be op-
erated.
Flashes slowly (1 × per sec.): Coupling mode active.
Flashes quickly: Firmware update active.
LunAqua Connect Power Supply 36 W
• INT cable power supply with type F earthed plug.
EN
21