Oase LunAqua Connect System Gebrauchsanleitung Seite 27

Operating the Controller OASE Switch
To operate the Controller OASE Switch with the "OASE Switch" app ...
• the Bluetooth function of the smartphone/tablet must be switched on.
• the smartphone/tablet must be paired with and connected to the Controller OASE Switch.
• the "OASE Switch" app must be open on the smartphone/tablet.
• the distance between the smartphone/tablet and Controller OASE Switch must not be too
large. (Max. 40 m with a clear view; correspondingly less if the radio connection is impaired by
walls, plants or other obstacles)
Updating the firmware
When the "OASE Switch"-App connects with the Controller OASE Switch it is automatically
checked whether its firmware is up to date. If the firmware is new, you will be notified via the
App. Follow the instructions.

The blue LED flashes quickly during the firmware update.
Maintenance and cleaning
If necessary, clean the system components with clear water using a soft sponge or cloth.
• Never use aggressive cleaning agents or chemical solutions. These could attack the housing
surface or impair the function.
EN
27