Parkside Performance PSSAP 20 Li C4 Originalbetriebsanleitung Seite 21

7. The information of the cordless sabre saw
"PSSAP 20 Li C4 (2201)" can be found in
{Device info}.
NOTE
Upgrading the firmware can change the
u
features of the Lidl Home app.
˜ Features of the Lidl Home app
If you select a battery pack, this will take you to
the battery pack overview page.
˜ Smart battery pack
{Brief overview} (above)
In the upper window, a brief overview of the
o
battery pack and the following details are
displayed:
–
current temperature
–
status
–
time to complete discharge
–
state of charge in %
If you swipe right on the top window, you
o
scroll through charts showing the following
details:
–
the temperature curve (the red line in the
shows the overheating threshold. The black
line shows the current battery temperature)
–
the charging current curve
–
the discharge current curve
–
the capacity curve
{Locking the battery
Set a PIN to lock and unlock the battery pack
o
for use.
{Battery pack work
Select work modes:
o
– {Performance}
– {Balance}
– {ECO}
– {Expert}
{Expert}
In mode, you can set the low discharge
voltage and maximum continuous discharge
current yourself.
20 GB
pack}
mode}
{Notification}
Enable or disable overheat alarm:
o
–
Receive notification on your smartphone if
the battery pack exceeds the overheating
threshold.
–
Enable or disable notifications using the
{Overheated Alarm
Switch charge status display on/off:
o
–
Switch the charge status display of the
battery pack on/off via the
identifier}. The charge status display of
the battery pack switches off automatically
after a short time.
{°F/°C switch}
Switch between degrees Celsius and degrees
o
Fahrenheit.
{Information}
Overview of information for the battery pack.
o
Statistics
Display of the following details:
o
–
number of charging cycles
–
number of discharging cycles
–
total runtime
{Settings}
After selecting the battery pack, find the
o
icon at the top right.
Press the icon again and you can make the
o
following changes to the battery pack:
– {Symbol}
‒ assign a new image
–
{Name}
‒ assign a new name
– {Location}
‒ assign a new location
You can also access
o
menu.
{Enable device}
Authorise another user from the same
o
household to use the battery pack via the
Lidl Home app.
{FAQ}
Check current firmware.
o
Update of the firmware via
o
firmware upgrade}
Switch}
option.
{Battery
{Device info}
from this
{Check for