Parkside Performance PSSAP 20 Li C4 Originalbetriebsanleitung Seite 17

˜ Checking the battery pack
charging level
(Fig. B)
Check battery pack charge level: Press the
button . The charging level LEDs
[ ]
light up:
LED
[ ]
Red/orange/green
Red/orange
Red
˜ Charging the battery pack
(Fig. C)
NOTE
The battery pack
u
any time without reducing the life.
Interrupting the charging process does not
u
damage the battery pack
Charge the battery pack
when it is at medium or low charging level.
The charging control LEDs (green
red ) indicate the status of the charger
[ ]
and the battery pack
LED
Red LED lights up
Green LED lights up
Green and red LED
flashing
Red LED flashing
Green LED lights up
(without battery pack)
Insert the battery pack
charger .
[ ]
Connect the power cord with power plug
of the charger to the socket.
[ ]
When the battery pack
Remove the battery pack from the charger
Then disconnect the power cord with power
plug of the charger from the socket.
[ ]
16 GB
[
Charging level
Maximum
Medium
Low
may be charged at
[ 8 ]
.
[ 8 ]
before operation
8 ] [
and
[ ]
:
[ 8 ]
Status
Battery pack
charges
Battery pack fully
charged
Battery pack
defective
Battery pack too
cold or too warm
Charger ready
into the
8 ] [
is fully charged:
[ 8 ]
˜ Adjusting the base plate
(Fig. E)
m WARNING!
Always switch the product off, remove
]
the battery pack
product cool down before making any
adjustments!
m CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use. Always wear protective
gloves when handling saw blades.
CAUTION! RISK OF INJURY!
m
Remove the saw blade from the product
u
before adjusting the base plate
(see "Inserting/removing the saw blade").
Do not use the product without having
u
inserted the base plate
To adapt to the workpiece, the base plate
be adjusted and swivelled to different positions.
[ ]
Unlock the base plate
lever in a counter-clockwise direction.
[ 1 ]
Adjust the desired position of the base
plate by pushing it in or pulling it out.
[ 4 ]
Lock the base plate
lever in a clockwise direction.
1 ] [
˜ Inserting/removing the saw
blade
m WARNING!
Always switch the product off, remove
the battery pack
product cool down before making any
adjustments!
[ ]
m CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
.
[ ]
hot during use. Always wear protective
gloves when handling saw blades.
and let the
8 ] [
[ 4 ]
.
[ 4 ]
can
4 ] [
: Turn the locking
[ 4 ]
: Turn the locking
[ 4 ]
and let the
[ 8 ]