Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Malfunctions and troubleshooting
WARNING!
Risk of injury due to unprofessional installation, maintenance and repair
work
Improperly performed installation, maintenance and repair work can lead to
serious injuries.
– Work may be carried out only by authorised and trained specialist
personnel.
– Before starting work, switch off the control unit and secure it against being
switched back on.
– If available, press one of the emergency stop buttons before starting work.
– Observe the safety data sheet for the chemical product used.
– Before starting work, disconnect the chemical supply and clean the control
unit.
– Use only approved original spare parts.
WARNING!
Risk of injury from automatically starting components
With some components, an automatic start-up is already started as soon as
the power supply is connected or restored after a power failure. This is done
without first actuating a switch or button and can lead to injuries.
– Ensure operational readiness before connecting the power supply
– Prevent automatic restart after power failure by suitable superordinate
measures
CAUTION!
Danger of slipping on wet floors
Liquids leaking in the working and preparation area can cause slipping and
injuries.
– Wear non-slip, chemical-resistant shoes when working
– Shut off the area of the escaping liquid
– Duly absorb any liquids escaping during work
– Keep a suitable container ready to collect the liquids during maintenance
work
NOTICE!
Material damage due to additional weight loads
Additional weight loads can cause material damage to the control unit.
– Do not load the control unit with additional weight
– Do not step upon the control unit or use it as a climbing aid
– Do not place heavy tools on the control unit.
Rev. 03-12.2023
86
Werbung
