ECOLAB DryExxEco Advanced-ETH Betriebsanleitung Seite 127

ENVIRONMENT!
Leaked, spilled metering media must be cleaned and disposed of correctly,
according to the instructions on the safety data sheet. It is essential to ensure
that the required personal protective equipment (PPE) is used.
Unauthorised access
DANGER!
Unauthorised access
The owner must ensure that unauthorised personnel are prevented from
accessing the operating area.
Hazard arising from automatic start-up
DANGER!
Automatic start-up poses a hazard in areas marked with the symbol opposite.
An automatic start-up can be initiated as soon as the power supply is
connected with no need to press a switch/button beforehand.
CAUTION!
Danger of automatic start of the control unit
If the autostart function is active, the control unit operator is responsible for
taking suitable measures to ensure that an unwanted start-up of the control
unit is prevented when the mains power is restored after a power cut.
Installation, maintenance and repair work
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools. Use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the applicable
local regulations. Safety regulations and prescribed protective clothing when
handling chemicals should be followed. Attention must be paid to the
information included on the product data sheet for the metering medium used.
Prior to all work the feeding of the metering medium should be disconnected
and the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance and
repairs.
21
Safety
Rev. 03-12.2023