Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The following information is displayed:
Field
Description
Circuit:
Number of the selected circuit (lubrication circuit or valve)
area:
Number of the selected area (installation or zone)
continual no. of this
Number of the valve assigned to the selected circuit in the selected range.
valve:
pulse time :
n
n
break time :
n
n
booster :
Displays if the booster function is active.
release :
Indicates whether an enable signal is present for the valve.
The following information and settings can be made or accessed:
- Back to the 'start screen.'
Ä Chapter 8.1 'Start screen' on page 52
[Valve Times] - The 'Valve Times :' screen opens.
Ä Chapter 8.7.1 'Setting valve times' on page 82
[Boost Times] - The 'Boost Times' screen opens.
Ä Chapter 8.7.2 'Setting boost times' on page 83
[Return]
- Back to 'circuit selection'
Ä Procedure step 3 on page 0
'Default' : Preset cycle time of the valve
'Actual' : When the valve is activated, counts up the time until the preset time is
reached
'Default' : Preset pause time until the valve is reactivated
'Actual' : Counts up during the pause until the preset time is reached
81
Software description
Rev. 03-12.2023
Werbung
