Herunterladen Inhalt Inhalt Diese Seite drucken

Turning Off The Appliance; How To Use The Accessories; Important Application Instructions - Kärcher SC 1125 Kurzanleitung

Vorschau ausblenden Andere Handbücher für SC 1125:
Inhaltsverzeichnis

Werbung

Screw the safety cap (A3) back onto the
device.
Press the switch (A2) to turn on the ap-
pliance.
The orange indicator lamp (B2) goes out
after approximately 10 minutes. The
steam cleaner is ready to use.

Turning Off the Appliance

Press the switch (A2) to turn off the ap-
pliance.
Disconnect the mains plug from the
socket.
Press the cover of the appliance connec-
tor (A1) to the bottom and disconnect the
steam plug (C6) from the appliance con-
nector.
20 English

How to Use the Accessories

Important application instructions

Cleaning of Textiles
Before you use the steam cleaner for the
cleaning of textiles, you should always test
the resistance of the fabrics against steam
by means of cleaning a hidden spot. Apply
steam to the hidden spot, and then let it dry.
Check whether the colour and shape of the
area have changed.
Cleaning of Coated or Lacquered
Surfaces
WARNING
Never direct the steam jet at glued edges as
the edge band may loosen. Do not use the
steam cleaner on wooden or parquetry
floors that have not been sealed.
Be careful when you clean kitchen and living
room furniture, doors, parquetry, lacquered
or plastic-coated surfaces! Upon a longer in-
fluence of steam, wax, furniture polish, plas-
tic coatings, or paint may come off, or stains
may occur. Therefore, you should only clean
such surfaces using a piece of cloth to which
steam has been applied or very briefly using
a double layer of cloth on the nozzle.
Cleaning of Glass
WARNING
Never direct the steam jet directly at the
sealed parts of the window around the win-
dow frame to prevent damages of the seal-
ing.
In case of low outside temperatures, espe-
cially in the winter, warm up the window
pane. Apply a small quantity of steam to the
entire glass surface. Thus, you compensate
temperature differences and avoid stresses
in the glass surface. This is of importance
because glass surfaces that are heated un-
evenly may crack.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis