bürkert 8081 Bedienungsanleitung Seite 10

2. inTended use
use of the ultrasonic flow rate transmitter that does not com-
ply with the instructions could present risks to people, nearby
installations and the environment.
• The 8081 transmitter is intended solely for the measurement of
the flow rate in water or neutral liquids.
• If possible, avoid placing this device near sources of electromag-
netic interference
• This device must be protected against ultraviolet rays and, when
installed outdoors, the effects of the climatic conditions.
• This device must be used in compliance with the characteristics
and commissioning and use conditions specified in the contractual
documents and in the user manual.
• The device can only be used together with devices and compo-
nents recommended and/or approved by Bürkert.
• Requirements for safe and proper operation are proper transport,
storage and installation as well as careful operation and mainte-
nance
• Only use the device as intended.
6
All manuals and user guides at all-guides.com
english
Type 8081
intendeduse
2.1. Restraints
Observe any existing restraints when the device is exported.
2.2. Foreseeable misuse
• The type 8081 ultrasound flow rate transmitter must not be used in
a potentially explosive atmosphere.
• Do not use fluid that is incompatible with the materials of which the
transmitter is made.
• Do not subject the device to mechanical loads (e.g. by placing objects
on top of it or by using it as a step).
• Do not make any external modifications to the device. Do not paint
or varnish any part of the device.