Herunterladen Diese Seite drucken

System Options; Network Settings - Dedicated Micros digital sprite Einrichtungsanleitung

Vorschau ausblenden Andere Handbücher für digital sprite:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 58

System Options

System Options
Unit number
DST

Network settings

Factory default
Recording
System shutdown
Event copy destination
Serial telemetry type
See appendix 3 for details of setting up JVC or Ultrak domes.
Unit number
Each unit must be defined a unique number if multiple units are connected to the
c-bus network. Up to 16 units can be connected to the c-bus network.
DST
Daylight saving time can be automatically or manually adjusted. It is recommended
that the automatic option be used.
Network settings
This option is used to configure the unit for connection to a 10base-T Ethernet
network. A pop-up box for configuring the network settings is displayed with the
following items:
IP Address
Subnet mask
Default gateway
Digital Sprite must be restarted if changes are made to the network settings.
WARNING: The IP address, Subnet mask, and Default gateway must be valid for
the network it is to be installed on. If they are not valid, the network may become
unstable. If in doubt, contact the network administrator.
Tip: It is advisable that an installer password is set (in the Passwords menu page)
to prevent the network settings being changed by unauthorised users.
18
01
16
Auto
Manual
Edit
Reset
Enabled
Disabled
Disabled
None
(Drive letter)
None
JVC, Ultrak
000.000.000.000
000.000.000.000
000.000.000.000
Factory default
Use this option to return all settings to the factory condition.
Recording
By default, recording is always enabled. If you do not want to record,
select Disabled.
System shutdown
Before removing power from the unit, select this option and follow
on-screen instructions.
WARNING: Data loss may occur if a system shutdown is not performed before
removing power.
Event copy destination
Each external backup device connected to the unit is automatically detected on
power up. Select the correct external backup device for copying events. Events
can only be copied to removable media such as Iomega Zip
Serial telemetry type
Select the telemetry type connected to the serial port; JVC, Ultrak or none.
®
or Jaz
®
.

Werbung

loading