Using The Menus - Dedicated Micros digital sprite Einrichtungsanleitung

Configuring
Using the menu
Digital Sprite uses a paged menu system to guide the installer through the
installation process.
Entering the menu
Press and hold the mode or menu key.
Note: A password may be required if one has previously been set.
Navigating the menu
The menus are displayed with options on the left hand column and settings in the
right hand column. A cursor (highlighted text) can be moved using the
cursor keys on the front panel, or the joystick on the remote keyboard.
To change the settings
1. Use the cursors to select the option you wish to change in the left hand
side of the menu.
2. Use the cursor to highlight the settings.
3. Use the cursors to change the settings.
4. Use the cursor to return to the options.
To view the next page
Press the mode or menu key. Or press the
To exit the menu
Press and hold the mode or menu key or cycle through all the menus to exit.
Note: If there is an alarm trigger or a camera fail, the 'Alarm & Camera Status'
page is displayed before the menus, indicating which cameras have an alarm or
failed camera. Press the mode or menu key to display the first menu page.
" #
key, the key views the previous page.
Example of using the menu to change the time:
Time, Date & Language
Date Date 30/10/2000
Time W 12:00
Date format Day, Month
Language English
1. Press and hold the mode or menu key to display the menu page above.
Time, Date & Language
Date 30/10/2000
Time Time W 12:00
Date format Day, Month
Language English
2. Use the cursors to select the Time option on the left hand side
of the menu.
Time, Date & Language
Date 30/10/2000
Time W 12:00 00
Date format Day, Month
Language English
3. Use the cursor to highlight the minute settings.
11