Alarm Setup; Activity Setup - Dedicated Micros digital sprite Einrichtungsanleitung

Alarm Setup

Alarm SetUp Pre-alarm
Post-alarm
Auto copy
Global alarm contact Off
Alarm relay (R1)
Alarm display
Pre-alarm
Pre-alarm images can be recorded for a pre-set time prior to an alarm. Select the
number of minutes or seconds (30 min 59 sec maximum).
Note: Pre-Alarm Recording only occurs if standard recording is taking place.
Post-alarm
Post-alarm images can be recorded for a pre-set time after an alarm. Select the
number of minutes or seconds (30 min 59 sec maximum).
Auto copy
Alarms can be automatically copied to an external Zip
Global alarm contact
A global alarm contact is used to force all cameras into an alarm condition.
This could be used if one alarm needs to trigger all cameras, or as a panic alarm
operated manually. Options are direct, using the AUX input, or using a specific
contact on an alarm module.
Alarm relay (R1)
Choose whether the alarm relay (R1) will open or close when an alarm is activated.
R1 will clear when all alarms are deactivated.
Alarm display
By default, the last alarmed camera is not displayed on the main monitor. Select
'Yes' to display cameras with alarms.
16
00 min 00 sec
00 min 00 sec
No Yes
Direct, Module 01 Contact 01
Close Open
No Yes
® or Jaz ® disk.

Activity Setup

Activity SetUp Pre-activity
Post-activity
Auto copy
Activity relay (R2) Close
Activity display
Pre-activity
Pre-activity images can be recorded for a pre-set time prior to an activity event.
Select the number of minutes or seconds (30 min 59 sec maximum).
Note: Pre-Activity Recording only occurs if standard recording is taking place.
Post-activity
Post-activity images can be recorded for a pre-set time after an activity event.
Select the number of minutes or seconds (30 min 59 sec maximum).
Auto copy
Activity events can be automatically copied to an external Zip
Activity relay (R2)
Choose whether the activity relay (R2) will open or close when activity
is detected. R2 will clear when activity is no longer detected.
Activity display
By default, the last camera with activity detection is not displayed on the main
monitor. Select 'Yes' to display cameras with activity.
00 min 00 sec
00 min 00 sec
No Yes
Open
No Yes
® or Jaz ® disk.