Werbung
Verfügbare Sprachen
Verfügbare Sprachen
An example of connecting a remote alarm box to the Digital Sprite:
Main & Spot Monitors
Remote Keyboard
c-bus
Remote keyboards
A remote keyboard can be connected to a Digital Sprite to provide
extra functionality:
• Remote control from a distance of up to 1500m.
• Control of multiple Digital Sprites.
• A single Digital Sprite controlled from multiple locations.
• Control of on-board telemetry – PTZ, Focus, Wash, Wipe, Lights, Presets, Patrol
and Autopan.
• Jog/shuttle playback using the joystick.
• Panic alarm button (record all cameras at the alarm rate and activate the
alarm relay, R1).
• Direct control of all 9 or 16 cameras.
• Direct control of the spot monitor.
10
Remote Alarm Box
c-bus
The example below shows a remote keyboard connected to the Digital Sprite:
Remote Keyboard
Video switchers
Video switchers allow multiple Digital Sprites to be controlled from a single or pair
of monitors. This allows the flexibility of controlling up to 256 cameras from a
single location without having to purchase extra matrix equipment. The video
switcher routes the monitors from the Digital Sprite being controlled to the
operator's monitors, up to 16 control positions can have monitor switching.
The example below shows two Digital Sprites controlled from individual control
points. The video switcher routes the monitor outputs from the Digital Sprites to
the control points:
main & spot monitors
Video Switcher
Remote Keyboard
Tip: Each c-bus device is supplied with a 2m c-bus cable. To extend the distance
between devices, two c-bus junction boxes and power supply are required. A total
distance for the whole c-bus network can be up to 1500m.
Main & Spot Monitors
c-bus
main & spot monitors
Remote Keyboard
c-bus
Werbung
