Recognising Faulty Wearing Parts; Disposal - Fronius Robacta Twin Compact complete Bedienungsanleitung

Recognising
1.
faulty wearing
parts
1.
2.
3.
4.

Disposal

Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally-friendly way, in accordance with the European Di-
rective and national legislation. Used equipment must be returned to the distri-
butor or disposed of via an approved local collection and disposal facility. Cor-
rect disposal of used equipment promotes the sustainable recycling of material
resources. Failing to dispose of used equipment correctly can lead to adverse he-
alth and/or environmental impacts.
Packaging materials
Separate collection according to material. Check your local authority regulations.
Crush containers to reduce size.
2.
Insulating parts
- Notches
- Burned off or torn middle bar
- Scorched or torn-off shoulders
Nozzle fittings
- Notches and burns on the front edge
- heavily covered in welding spatter
Spatter guard
- Burned-off outside edges, notches
Contact tubes
- Worn out (oval) wire entry and wire exit holes
-
Heavily covered in welding spatter
- Burns on the tip of the contact tube
3. 4.
33