Maintenance Intervals; Storage; General Storage Instructions; Storage During Working Breaks - FLORABEST BL FBS 25 A1 Originalbetriebsanleitung

GB

Maintenance Intervals

Regularly carry out the maintenance work listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting per-
formance and avoids accidents.
Table "Maintenance Intervals"
Machine Part
Screws, nuts, bolts
Air filter
Fuel filter
Spark plug
Fuel hoses
Complete machine
Operating handle
Cutting head
Coupling

Storage

General Storage Instructions

• Clean the equipment and accessories
carefully before storage.
• Keep the equipment in a dry and dust-
proof place out of reach of children.
• Do not wrap the equipment in plastic
bags, as damp and mould may form.
• Do not store the equipment on the pro-
tective cover; ideally hang it from the
top handle.
6 6
Action
Check, tighten
Clean or replace
Replace
Clean/adjust/replace
Check, replace if necessary
Check, clean if necessary
Check for function
Check correct installation
Check that the device is sta-
tionary when idling
Storage During Working
Breaks
In case of working breaks of less
than 3 months:
1. Drain the fuel tank (7) in a well-ventilat-
2. Start the engine and allow it to tick
3. Allow the engine to cool (approx. 5
Before
Each Use





Non-observance of the storage
instructions can cause starting
problems or permanent damage as
a result of fuel residues in the carbu-
rettor.
ed place.
over until the engine stops and the car-
burettor is free of fuel.
minutes).
Operating
Hours
10 20



