E) „On Time" Display For Operating Time Per Day; F) Forecast Cost Preview Display; G) „Time" Display For Time And Date Display - VOLTCRAFT Energy Logger 4000 Bedienungsanleitung

e) „ON time" display for operating time per day
This display shows the operating time (REC time) and the effective running time (ON
time) of the electric consumption. This function
allows establishing the actual running time, such as with a fridge. A fridge switches
the cooling circuit on with a thermostat, which results in pauses.
The display can be differentiated from the current day (today) until 9 days in the past.
Via the two arrow keys (3 and 4) the days can be browsed back and forwards. This is illustrated under the display
masking „Today", e,.g. as „1" to „9". After the „-9" display, the entire time (total) is displayed.
Via this function peak days can be directly analysed on the device. The time is displayed in the decimal
system. Example: 1,700 h = 1 h 42 m (700 : 16.66 = 42 minutes ).
To switch the measurement displays, click the „MODE" (5) key for the next or the „Continue" arrow key (7) for the
previous display. Every time you press, you switch the display.

f) Forecast cost preview display

The cost preview allows establishing by calculation the costs for a month or the entire
year. The calculation can be swithced for tariffs
1 and 2 and is carried out via the two arrow keys (3 and 4).
The already used energy (total in kWh) is used as the basis of the calcula-
tion. This calculated value is only an idea which represents the possible
cause. Short measurement brakes or changed power prices can result in
deviations. The measurement device is not approved for balancing pur-
poses.
To switch the measurement displays, click the „MODE" (5) key for the next or the „Continue" arrow key (7) for the
previous display. Every time you press, you switch the display.
g) „Time" display for time and date display
The time and date are displayed in the display mode. By pressing the „max" key (4),
the time and date format can be controlled.
To switch the measurement displays, click the „MODE" (5) key for the next or the
„Continue" arrow key (7) for the previous display. Every time you press, you switch
the display. After the last display, it starts again at the „Power1" display.
29