Intended Use; Contents - VOLTCRAFT Energy Logger 4000 Bedienungsanleitung

3. Intended use

The energy cost measuing device serves to measure and analyse consumption details of electrical devices. The
measuring device is simply connected between the mains socket and the electric device and requires no additional
installation. Operation is only allowed at standard household protection mains sockets with a nominal current of 230 V/
AC. The max. nominal performance must not exceed 3500 watts. If the product is overloaded, it may be damaged. The
warranty/guarantee will become void in these cases. Do not plug together several energy cost measuring instruments.
The measuring device has an internal, non-volative memory where the data for performance factor, current and power
can be saved for up to 6 months. Via an SDHC card slot this data can be transferred to a computer for analysis.
Two additoinal freely programmable tariffs are available for cost calculation. The device also calculates a cost preview
per month and year. The consumption data can also be displayed directly on the device retroactively up to 9 days.
The measuring device is not officially calibrated and must therefore not be used for balancing purposes.
A buffer battery supplies the internal clock when switched off. The device may only be operated with the specified
batteries.
The measuring instrument must not be operated when it is open, i.e. with an open battery compartment or when the
battery compartment cover is missing. Measuring in damp rooms or under unfavourable ambient conditions is not
admissible.
Unfavourable ambient conditions are:
- Wet conditions or high air humidity
- Dust and flammable gases, vapours or solvent,
- Thunderstorms or similar conditions such as strong electrostatic fields etc.
Any use other than the one described above damages the product. Moreover, this involves dangers such as e.g. short
circuit, fire, electric shock, etc. No part of the product must be modified or rebuilt!
Read the operating instructions carefully and retain them for later reference.
The safety instructions must be observed at all times.

4. Contents

• Measuring device with cell
• Software CD with evaluation software
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or
scan the QR code. Follow the instructions on the website.
21