Delete Data Memory; Software Installation - VOLTCRAFT Energy Logger 4000 Bedienungsanleitung

13. Delete data memory

The internal, non-volatile data memory can only be deleted manually. This is practical after every data transmission or
before a new measurement of an electric device.
When simultaneously pressing the "MODE" button (5) and the "Continue" button (7) for at least 5s, all displays for
"Consumption", "History", "ON time" and "Forecast" are reset to zero and the memory "MEM" is deleted (reset). Hold
down on both buttons, keeping them pressed down, until all symbols are shown in the display. After releasing the keys,
the basic settings menu item "Select device ID" opens.
An empty data memory is signalised with a „MEM 99%" display.

14. Software installation

The most current version of the standard software "Voltsoft" is available as download!
Please ensure that you use the most current version of the "Voltsoft" software for installation. It is available
in the download centre of the corresponding product under the following link:
http://www.produktinfo.conrad.com/
1 Insert the CD provided into the CD drive or your computer or start the unpacked installation file "autorun.exe" if
you downloaded the software.
2 When installing from a CD, the installation starts automatically. If this is not the case, select the installation file
"autorun.exe" in the directory of the CD drive.
3 Follow the instructions on the dialog box, select the destination for the installation and complete the installation.
4 For further information, please refer to the operating instructions on the CD provided.
You can find further information in the Voltsoft operating instructions contained on the CD or unpacked during the
software download.
If additional software features such as a web interface are required, the optional "Voltsoft Pro" version is
available at a cost.
31