Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Addressing
The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the LED MFX-3 Action Cube will respond to the controller.
If you set, for example, the address to channel 17, the device will use the channel 17 to 32 for control.
Please, be sure that you don't have any overlapping channels in order to control each LED MFX-3 Action
Cube correctly and independently from any other fixture on the DMX-chain.
If several LED MFX-3 Action Cubes are addressed similarly, they will work synchronically.
Press the Up/Down-buttons for setting the desired starting address. Now you can start operating the LED
MFX-3 Action Cube via your lighting controller.
Note:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If the data
is received at the DMX-input, the display will show "A.001", the dot will flash, with the actually set address. If
there is no data received at the DMX-input, the display will show "A001" with the actually set address.
This situation can occur if:
- the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
DMX-protocol
Channel
Decimal
1
1
0
255
2
0
255
2
3
0
255
4
0
255
0
30
31
140
3
5
141
145 8D
146
255
4
6
0
225
226
255 E2
5
7
0
255
6
8
0
255
Hexad.
Percentage
00
FF
0%
100%
00
FF
0%
100%
00
FF
0%
100%
00
FF
0%
100%
00
1E
0%
12%
1F
8C
12%
55%
91
55%
57%
92
FF
57%
100%
00
E1
0%
88%
FF
89%
100%
00
FF
0%
100%
00
FF
0%
100%
S/F
Horizontal movement (PAN)
Push slider up in order to move the head
horizontally (PAN). Gradual head adjustment from
F
one end of the slider to the other (0-255, 128-
center). The head can be stopped at any position
you wish.
PAN-movement with 16-bit resolution
F
Fine indexing
Vertical movement TILT
Push slider up in order to move the head vertically
(TILT). Gradual head adjustment from one end of
F
the slider to the other (0-255, 128-center). The head
can be stopped at any position you wish.
TILT-movement with 16-bit resolution
F
Fine indexing
Function TILT movement
S
No function
Unlimited TILT rotation forwards with decreasing
F
speed
S
Stop
Unlimited TILT rotation backwards with increasing
F
speed
PAN/TILT speed
F
Decreasing speed
S
Maximum speed
Red
F
Gradual adjustment of the intensity from 0 to 100 %
Green
F
Gradual adjustment of the intensity from 0 to 100 %
27/31
Feature
00098918, Version 1.0
Werbung
