Internal Programs; Sound Control; Setting The Sound Sensitivity; Preset Colors - EuroLite LED PAR-64 W/A 36x1W Bedienungsanleitung

Internal Programs

Press the MODE button to select the internal program mode. When the display shows P, you can select the
desired internal program, via the UP or DOWN buttons.
Mode:
P
Speed
Press the MODE button to select the speed of the internal programs. When the display shows S, you can
select the desired speed, via the UP or DOWN buttons.
Mode:
S S001 - S100
Default is 50.

Sound Control

Press the MODE button until the display shows P to select the sound control mode. Then press the UP or
DOWN buttons until the display shows P3.
Mode:
P

Setting the Sound Sensitivity

You can do without a controller as the device features a built-in microphone, which provides automatic sound
control. You can adjust the sensitivity with the rotary-control on the rearpanel.

Preset Colors

This device features pre-programmed static-color presets. Press the MODE button until the display shows C.
You can select the desired solid color via the UP or DOWN buttons.
Mode:
C

Custom Static-Color Mixing

Press the MODE button until the display shows U. You can then select the first desired color value via the
UP or DOWN buttons. After 1 - 2 seconds, press the UP or DOWN buttons to select the second color value.
Mode:
r000 - 100
U
C000 - 100

DMX MODE

The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PAR-64 W/A 36x1W will respond to the controller.

Addressing

Press the MODE button until the display shows D. You can now set the desired address via the UP or
DOWN buttons.
Value:
P1
P2
Value:
Value:
P3
Value:
C1
C2
C3 Warm and cool white
Value:
Function:
Color fading
Color switching
Function:
Increasing speed
Function:
Color switching
Function:
Warm white
Cool white
Function:
Warm white
Cool white
19/21 00051972.DOC, Version 1.1