Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Sound Control 3 – 7 pattern change and 7 pattern dimming
In order to select Sound controlled pattern change and pattern dimming, set DIP switch 2 and 9 to ON
and DIP switch 10 to OFF.
DMX-CONTROLLED OPERATION
You can control the spots individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
For DMX-controlled operation set DIP Switch 10 to ON.
Addressing
Each device occupies 4 channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DIP-switches
as set out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
Occupation of the DIP-switches:
Setting the DMX-
DIP-switch no.
starting address:
Projector number
DMX-starting
& channels
address
On
Device 1 - channels 1-4
Off
Off
On
Device 2 - channels 5-8
Off
On
Device 3 - channels 9-12
Off
On
Device 4 - channels 13-16
Off
On
Device 5 - channels 17-20
Off
Controlling:
After having addressed all LED MF-6 WHITE Flower Effect devices, you may now start operating these via
your lighting controller.
DMX-protocol
Channel:
Value:
1
000 – 027
028 – 055
056 – 083
084 – 111
112 – 139
140 – 167
168 – 195
196 – 223
224 – 255
2
000 - 255
3
000 – 015
016 - 255
4
000 - 255
1
2
3
4
5
6
4
16
32
1
2
8
Dimming
3 pattern change
7 pattern change
Fade
Dream
Auto
Sound controlled 7 pattern change
Sound controlled 7 pattern dimming
Sound controlled 7 pattern change & 7 pattern dimming
Speed
Off
Flash
White
7
8
9
64 128 256
Function:
25/53
00030226.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
