Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX MODE
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED ML-56 TCL 18x3W will respond to the controller.
Addressing
Press the MODE button until the display shows Add. You can now set the desired address via the UP or
DOWN buttons.
Setting the DMX Start Address:
Mode:
Add
001 - 512
Controlling:
After having addressed the LED ML-56 TCL 18x3W, you may now start operating it via your lighting
controller.
Note:
It's necessary to insert the XLR termination plug with 120
proper transmission on the DMX data link.
Choosing a DMX Channel Mode with 3 or 5 Channal Occupation
The device has 2 DMX-modes. The Control Board allows you to assign the DMX-Mode.
Setting DMX Mode
After setting the desired address via the UP or DOWN buttons, press the MODE button again and the
display shows 5ch.
In case you would rather select the 3-channel mode, press the DOWN button in order to choose the 3ch
setting.
Mode:
5ch (default setting)
DMX-protocol
5 Channel Mode
Channel:
Value:
1
000 – 255
Channel:
Value:
2
000 – 255
Channel:
Value:
3
000 – 255
Channel:
Value:
4
000 – 255
Channel:
Value:
000 – 000
001 – 005
5
006 – 010
011 – 255
Value:
Value:
3ch
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
Dimmer (0 – 100%)
Function:
No function
Sound Control (7 colors)
ON
Strobe (increasing)
in the last lighting in the link in order to ensure
20/22
00051994.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
