Waeco AirCon Service ASC 6300 G LE Bedienungsanleitung Seite 28

EN
Short selection
Free selection
Other selections
ENTER‐OK
3. Press ENTER
4. If necessary, use the keypad to enter the data and press
press ENTER
5. Select Rec/Recycling phase (the setting flashes) and press
6. For the Pressure increase Test time, enter 1 min and press
7. Deselect Vacuum phase using No (the setting flashes) and press
8. Deselect Filling phase using No (the setting flashes) and press
9. Select Process start by pressing
10. After the extraction process is complete, disconnect the A/C service unit from the vehicle.
11. Disconnect the system components which cannot be flushed from the refrigerant circuit. These components
include:
• Compressor
• Line filter
• Fixed choke
• Collection containers
• Filter drying units
• Expansion valve
12. Connect the components for flushing to the service ports of the A/C service unit using special adapters and in
accordance with the manufacturer's specifications to form a flushing circuit.
Note Observe the guidelines on repairs from the vehicle manufacturer.
13. In the basic menu use the cursor keys or to select Other selections.
Short selection
Free selection
Other selections
ENTER‐OK
14. Press ENTER
15. Use the cursor keys or to select Flushing.
Flushing
Reset scales.
Service.
ENTER‐OK STOP‐EXIT
16. If necessary, use the keypad to enter the data and press
press ENTER
17. Use the cursor keys or to select whether to flush the entire air conditioning system or just individual com­
ponents:
Full flushing
Fast flushing
ENTER‐OK STOP‐EXIT
18. Press ENTER
19. Follow the instructions in the display.
After flushing is completed, the basic menu for the A/C service unit appears.
20. If necessary, remove the adapter from the flushing circuit and reconnect all the components to the refrigerant
circuit. Fit the connections of the A/C service unit to the vehicle air conditioning system and open them.
21. In the basic menu use the cursor keys or to select Free selection.
28
to confirm.
to switch to the next program step.
ENTER
to confirm.
to switch to the next program step.
to confirm.
ENTER
to confirm. If no data has to be entered,
ENTER to confirm.
ENTER
ENTER
ENTER
.
ENTER to confirm. If no data has to be entered,
to confirm.
to confirm.
to confirm.