Parameter
UV tracer ml.
Filling Qt. g.
Display logo?
1. In the basic menu use the cursor keys or to select Other selections.
Short selection
Free selection
Other selections
ENTER‐OK
2. Press
ENTER
to confirm.
3. Use the cursor key to select Service.
4. Press
ENTER
to confirm.
5. Enter the password
7388
6. Use the keypad and the cursor keys to enter the information.
7. Press
ENTER
to confirm.
8. Press
STOP
.
The standby menu is displayed.
12.9 Inserting the containers for oil and UV additive
NOTICE! Damage hazard
Only use oils approved for the corresponding refrigerant. Observe the manufacturer's instructions.
The current supply quantities are displayed in the standby menu.
1. Open the cover flap (20) on the left side and push the containers into the snap locks:
.
Default value
0
500
Yes
EN
15